Gas Parts

48" Stainless Steel Braided Hose and 10 PSI High Pressure Regulator with brass Control Valve and 3/8" Female Flare Fitting.

The 63-5116 kit consists of a low pressure L.P. gas regulator with a standard P.O.L. installed into the inlet and a ten foot hose with a 3/8 female flare swivel installed into the outlet. the 63-5116 kit is required on all stoves that require a 11" W.C. regulator.

The 63-5116-QCC kit consists of a low pressure L.P. gas regulator with a standard p.o.l. installed into the inlet and a 10 foot hose with a 3/8 female flare swivel installed into the outlet. The 63-5114 kit is required on all of stoves that reguire a 11" w.c. regulator.

10-Ft. High Pressure Rubber Hose with 3/8" Female Flare fitting on one End and a 1/4" Pipe Thread Male fitting on the other End. Features:   High Pressure LPG Hose. 1/4" MNPT x 3/8" FNPT Brass Connector. 350-PSI Maximum Use.

12 FT. 1/4 Inch Id Rubber hose with two 3/8 Female swivel fittings.This hose assembly is manufactured using high pressure hose which is rated at 350 psi working pressure and 1750 psi burst.Fittings are secured with full length brass ferrules to meet the maximum pull test as required by the standard

12 FT. Adapter hose allows any appliance that runs off a disposable cylinder to be converted to use a larger propane tank.Ideal for table top grills,camp stoves, lanterns,ect.

2 Ft 1/4 Inch Id Rubber hose with two 3/8 Female swivel fittings.This hose assembly is manufactured using high pressure hose which is rated at 350 psi working pressure and 1750 psi burst.Fittings are secured with full length brass ferrules to meet the maximum pull test as required by the standard

3 FT. 1/4 Inch Id Rubber hose with two 3/8 Female swivel fittings.This hose assembly is manufactured using high pressure hose which is rated at 350 psi working pressure and 1750 psi burst.Fittings are secured with full length brass ferrules to meet the maximum pull test as required by the standard

3 FT. Adapter hose allows any appliance that runs off a disposable cylinder to be converted to use a larger propane tank.Ideal for table top grills,camp stoves, lanterns,ect.

30" High Pressure Hose and 10-PSI Preset Regulator with 3/8" Female-Flare Fitting. Features: 10-PSI Preset Regulator. High Pressure LPG Hose. 3/8" Flare Swivel Fitting.

36" Low Pressure Hose and 1-PSI Regulator .Good for Use on BBQ Grills. and other Low Pressure Equipment Features:   1-PSI Preset Regulator.   Low Pressure LPG Hose. 3/8" Flare Swivel Fitting.

4 FT. 1/4 Inch Id Rubber hose with two 3/8 Female swivel fittings.This hose assembly is manufactured using high pressure hose which is rated at 350 psi working pressure and 1750 psi burst.Fittings are secured with full length brass ferrules to meet the maximum pull test as required by the standard

4 FT. Adapter hose allows any appliance that runs off a disposable cylinder to be converted to use a larger propane tank.Ideal for table top grills,camp stoves, lanterns,ect.

48" High Pressure Hose and Regulator 30 PSI Adjustable. Features: 30-PSI Preset Regulator.   High Pressure LPG Hose. 3/8" Flare Swivel Fitting.

5 FT. 1/4 Inch Id Rubber hose with two 3/8 Female swivel fittings.This hose assembly is manufactured using high pressure hose which is rated at 350 psi working pressure and 1750 psi burst.Fittings are secured with full length brass ferrules to meet the maximum pull test as required by the standard

36" Stainless Steel Braided Hose and 5 PSI High Pressure Adjustable Regulator with 1/8" Male Orifice Connector.

The 63-5114 kit consists of a low pressure L.P. gas regulator with a standard p.o.l. installed into the inlet and a five foot hose with a 3/8 female flare swivel installed into the outlet. The 63-5114 kit is required on all of stoves that reguire a 11" w.c. regulator.

The 63-5114-QCC kit consists of a low pressure L.P. gas regulator with QCC Type-1 connection installed into the inlet and a five foot hose with a 3/8 female flare swivel installed into the outlet. The 63-5114 kit is required on all of stoves that reguire a 11" w.c. regulator.